Rubber filament is a new kind filament which is made of TPU, TPE and PLA. It's flexible.
Its density is 1.25g/cm3, elongation at break is 600% and tensile strength is 80N/mm2.
Softness is about 85A. Actual softness is based on modeling wall, refill and layer thickness settings.
This new kind filament has many superiority as below listed:
1. High softness and flexible.
2. It's as viscous as marlsugar, high adhesion o heatbed.
3. No breakage.
4. Easy to be holding and refilling.
5. Odorless, tasteless and eco-friendly.
Net Weight of Each Roll: 0.8KG
Diameter: 1.75mm and 3mm
Color: Transparent-Red, Transparent-Yellow, Transparent-Green, Transparent-Orange,, Transparent-Blue
Nozzle Temperature: 200℃-220℃
HeatBed Temperature: 100℃-110℃
Printing Speed: 30mm/s to 50mm/s
Packing: Vacuum packing with desiccant inside. Each vacuum packing filament should be put into one small box. 10 boxes in one carton.
Gross Weight of Each Carton: 13KG
Size of Each Carton: 37*27*42cm
1. Please print 1 meter or longer PLA filament when printing rubber filament. Clean the nozzle and pull out the PLA then feeding the rubber filament.
2. If the outing of filament is not smooth or more and more smaller, it means the temperature is not higher enough. If the surface of the model is rough, it means the temperature is too higher.
3. Newer operator to rubber filament please starts printing from 30mm/s, speed up when you are more familiar to it.
4. The hardness is about 80A. Actual hardness is based on parameter settings. The thinner of the thickness of the wall, the less refiller, the high softness and flexible.
5. Softer filaments are too hard to print and do not universal to main stream desktop 3d printer as tested. If you need softer filament than our normal selling, please contact us freely! We can customize for you accordingly.
6. Rubber filament support Makerbot 3d printer and printing speed is 25mm/s. It does not support UP 3d printer.
Shenzhen Cashmeral Industrial Co.,Ltd is always here to serve you the best as we can!